top of page

HH Series

Video Wall

The engineers at ZoomDS have made the thin bezel video wall display thinner, lighter, easier to deploy, easier to control, and better in every way.


The HH-Series HOOK&HANG mounting system is easy to setup and offers powerful control options through SICP software and remote control.


  • Easy to Install: displays are lighter and thinner, and incorporate the all new Hook&Hang bracket system

  • Easy 4K input Daisy Chain

  • Powerful ZD Wall Control software that allows you to switch inputs and layout configurations

  • In-depth OSD allows you to control and change settings of displays

  • Fully functional remote control allows you to control each display from a single remote

  • Built in temperature sensor with temperature margin to activate discreet fans only when needed

  • Thin bezel of 0.88mm, 1.7mm or 3.5mm combined between displays

  • 24/7/365 operation approved for commercial applications

  • 178 degree wide viewing angle

  • UHD resolution available with 65” display models


Available Display Sizes

HH Series displays come in 46", 49", 55" and 65" sizes


Bezel gap of  1.7mm or 3.5mm combined between displays 


Brightness of 500 or 700 NITS

55" displays also come available with 0.88mm combined bezel gap!!!

Our 65" displays come with UHD 3840x2160 resolution,

the only thin bezel video wall display to offer 4K resolution!


  • Multiple inputs available, with 4K input daisy chain capability through HDMI 2.0 loopout

  • Built in media player via USB IN (for single display mode only)

  • IR daisy chain for remote control sensor

  • UART daisy chain for serial control on PC with ZD WALL CONTROL software

  • Input switching and preconfigured layout switching possible via remote control or ZD WALL CONTROL software


Hook & Hang Mounting System

HH Series displays have mounting hooks at the 600mm x 400mm VESA positions. This allows displays to be hung onto mounting bracket right out of the box. This is possible when the included Holder Ring is secured onto a mounting bracket such as our full service Push-Out Bracket (ZB-POB). Installing the HH Series displays with our Push Out Bracket reduces the risk of damaging the display, and speeds up the installation process. The Push Out Bracket is also designed for video wall displays and offer perfect adjustment knobs for micro adjusting the display alignment (x,y,z).

  • ​Compatible with any 600x400mm VESA standard mounting bracket.

  • VESA conversion plates are available for standard installations.

  • Vertical conversion bars are available for portrait orientation installation

  • Compatible with our freestanding profiles (FLOOR STAND) for wall free installations


Metal Side Covers

Metal Side covers give your video wall sides a clean and sleek finishing touch, and also double as protection for your displays fragile edges. 

Did we mention it also makes your video wall look really sleek?

TOUCH screen

It is not a far-fetched idea! Using a combination of Optical cameras and IR sensors, it can be done. Sensors and Cameras are mounted on a metal frame designed for the HH-Series displays to make your entire video wall into a giant touch screen!

ZD WALL CONTROL - SICP Software for PC control

ZDWallControl capture.png

The ZD WALL CONTROL software allows
users to to control video wall settings, calibration, layouts, and scheduling via RS-232 Protocol

(UART Port). Most of the functions can be managed with the remote control provided,

but the software allows more control.

Video wall configuration setup, input
source, and layout choice can be chosen
from any tab.

* Display Set-ID, must be done directly on
the display OSD using remote control.

All ZoomDS displays will come factory color
calibrated to its counterpart displays within
a video wall configuration set. Additional
changes can be made through the
Calibration tab on the software.

Under the Schedule tab, users can schedule
ON/OFF time of displays, the layouts, and the back light brightness. 

Under the Systems tab, users can manage the Bezel compensation of each display and the temperature control.

ZDWall Control - scheduling.png
ZDWallControl - layout change.png

Under the Layout tab, users can save and load pre-configuired display layouts. The includes different input sources
chosen for independent displays or groups of displays. This powerful tool allows for matrix switching and eliminates
the need for additional switching hardware.


HH Series Specification.jpg
bottom of page